Extruded Acrylics
Colored Rods

Colored Tubes

Colored Sheets

Clear Sheets

Clear Rods

Angles 90°

Half Rods

Bar Stock

Frosted Rods

Clear & Colored Square Rods

Clear Round Tubes

Clear Square Tubes

Cast Acrylics
Colored Rods

Clear Sheets

Clear Rods

Clear Tubes

Extruded-Polycarbonate

Clear - Tinted Sheets

Machine Grade Rods

Clear Tubes

Tube Caps & Plugs

Felt Discs, Sheets, Strips

Square Watermelon Growing Cases

Pig Pipes

Acrylic Colored Pig Pipes

Machine Screws

Goods and services provided by K-mac Plastics (MI, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).

Contact Kmac Plastics
Domestic Selling Policy

Privacy

 

 

Component    Wt. %
C 0.38 - 0.43
Cr 0.8 - 1.1
Fe 96.785 - 97.84
Mn 0.7 - 1
Mo 0.15 - 0.25
P Max 0.035
S Max 0.04
Si 0.15 - 0.3
Physical Properties Metric English Comments
Density 7.85 g/cc 0.284 lb/in³  

Mechanical Properties
Hardness, Brinell 277 277  
Hardness, Knoop 302 302  Converted from Brinell hardness.
Hardness, Rockwell B 99 99  Converted from Brinell hardness.
Hardness, Rockwell C 28 28  Converted from Brinell hardness.
Hardness, Vickers 292 292  Converted from Brinell hardness.
Tensile Strength, Ultimate 883 MPa 128000 psi  
Tensile Strength, Yield 685 MPa 99400 psi  
Elongation at Break 19.2 % 19.2 %  in 50 mm
Reduction of Area 60.4 % 60.4 %  
Modulus of Elasticity 205 GPa 29700 ksi  Typical for steel
Bulk Modulus 140 GPa 20300 ksi  Typical for steel.
Poisson's Ratio 0.29 0.29  Calculated
Machinability 65 % 65 %  Based on AISI 1212 as 100% machinability.
Shear Modulus 80 GPa 11600 ksi  Typical for steel.

Electrical Properties
Electrical Resistivity 2.2e-005 ohm-cm 2.2e-005 ohm-cm  specimen hardened and tempered; 20°C (68°F)
Electrical Resistivity at Elevated Temperature 2.63e-005 ohm-cm 2.63e-005 ohm-cm  specimen hardened and tempered; 100°C (212°F)
Electrical Resistivity at Elevated Temperature 3.26e-005 ohm-cm 3.26e-005 ohm-cm  specimen hardened and tempered; 200°C (390°F)
Electrical Resistivity at Elevated Temperature 4.75e-005 ohm-cm 4.75e-005 ohm-cm  specimen hardened and tempered; 400°C (750°F)
Electrical Resistivity at Elevated Temperature 6.46e-005 ohm-cm 6.46e-005 ohm-cm  specimen hardened and tempered; 600°C (1110°F)

Thermal Properties
CTE, linear 20°C 12.2 µm/m-°C 6.78 µin/in-°F  0-100°C (32-212°F)
CTE, linear 250°C 13.7 µm/m-°C 7.61 µin/in-°F  20-400°C (68-750°F)
CTE, linear 500°C 14.6 µm/m-°C 8.11 µin/in-°F  20-600°C (68-1110°F)
Specific Heat Capacity at Elevated Temperature 0.473 J/g-°C 0.113 BTU/lb-°F  150-200°C
Specific Heat Capacity at Elevated Temperature 0.519 J/g-°C 0.124 BTU/lb-°F  350-400°C
Specific Heat Capacity at Elevated Temperature 0.561 J/g-°C 0.134 BTU/lb-°F  550-600°C
Thermal Conductivity 42.6 W/m-K 296 BTU-in/hr-ft²-°F  100°C
Thermal Conductivity at Elevated Temperature 33 W/m-K 229 BTU-in/hr-ft²-°F  600°C
Thermal Conductivity at Elevated Temperature 37.7 W/m-K 262 BTU-in/hr-ft²-°F  400°C
Thermal Conductivity at Elevated Temperature 42.2 W/m-K 293 BTU-in/hr-ft²-°F  200°C
 

Set Screws

Springs

Threaded Rods

Eyebolts

Lag Screws

Dowel Pins

Self Drilling Screws

Carriage Bolts

Spring Pins

Drill Bits

Taper Pins

Wood Screws

Sheet Metal Screws

Tapes

Contact Kmac Plastics

Sheets- Rods- Tubes   UHMW Sheets, Steel Balls, Composite Tubes and Sheets

Circuit Breakers, Murray Circuit Breakers, Pinewood Derby Cars

Extruded Acrylic Square Bars Mfg'd by FuturPlast